Important topic when it comes to solar panels or solar water heaters and tanks for water. Where to locate them, settle them and how to make them. The mounting systems of structures which can be iron galvanized with aluminum profiles are designed according to the place to settle. The placement is mostly on the roofs of the houses, i.e. roofs with slopes or against rain, snow, or hail. Not all slopes of the roofs have the same angle of inclination with respect to the floor of the House or building.
In addition, the material from which each roof is built can be very different one another ceiling by customs, aesthetic, quality of the House, finally, in all ways for evaluation each case. The supporting structures must be made according to heaters or photovoltaic solar modules. I.e., or just for a panel or a set of them according to requirements according to need power. On the other hand, the installation will have to be calculated based on the orientation of the Sun’s rays and the aesthetic aspect maximized with Ultra violet rays, also known as individual solar systems or multiple systems. For steeper roofs metal support structure will be typical design, with aluminum support duly painted electrostatic iron and full frame profiles; While for the roofs of shingles with light slopes, should adapt to the modules a few protectors of UV rays, with polyester coating, resistant to snow and hailstorms that are easier to deposit by the less aware. On flat ground floors, support structures are large and sophisticated thinking in multi-purpose modules and especially with the ease of placing the followers of Sun’s rays, with fierro and profiles of aluminium for functions of multi-angles of follow-up to the fall of the aforementioned rays.
For roofs in buildings such as houses of one or two floors, structures and models of supports both are different to those mentioned above. In either case these structures are made thinking of expansions in the system or modular systems for easy expansion in the future. In terms of its maintenance are very little once installed with anticorrosive and adjusters guards of brands with guarantee. Anyway they recommend periodic checks and maintenance scheduled annually as a minimum. Here one of the companies responsible for these structural supports globally: Schetler Inc.