Hardware Ventilated Facades
Ventilated facades, in the opinion of many architects, is the best solution for finishing the exterior of the building. Modern technology-based materials used in the manufacture of ventilated facades, provide an opportunity change the appearance of the building, give it a unique look. And what are the components of ventilated facades are also used? Key element by which the building and gets an updated look, is a fiber cement board latonit.latonit – a versatile, clean, fiber cement board, which is used in the manufacture of rosiyskie natural resources, such as: cement, pulp and mineral fillers. When production of plates used latonit pressing (at pressure of 650 N/cm2) and autoclaving (at 175oS and pressure of 10 atm.), which increases the density and mechanical strength in compression and izgib.Sleduschy important element of the ventilated facade – the frame. The frame can be metal or wood with special impregnation and fastened to the wall of the building. To him then attached the new front panel. Ventilated facade called "vented>> because between it and the wall there is an air gap, so the frame always stays dry, which positively affects the service life .V cases when you need insulation of buildings, between the bearing wall and facing panels pave the heater. Bottom line: the house becomes drier, warmer, old walls do not absorb vlagu.Pri installation of ventilated facades will not do well without such items as: aluminum profile, or wooden beams, brackets, anchors for attaching the bracket to the wall fittings (bracket in horizontal or vertical seam)..